The received isn't picking up the laser signalUpdated 2 months ago

If the receiver isn't picking up the laser, try the following steps:

1. Check the sender

• Ensure the sender is powered on and the battery isn’t dead.
• Confirm the sender is positioned correctly, with the laser pointed toward the receiver.

2. Ensure proper alignment

• Make sure the sender and receiver are aligned correctly.
• Verify that nothing is blocking the path of the lasers.

3. Inspect the receiver LEDs

• Green status LEDs indicate the lasers are being received.
• Red status LEDs indicate the lasers are blocked or not found.

If the issue persists, please contact our support team through our website for further troubleshooting.